Channel Controller

The current channel name is displayed here. You can change the naming by entering a new name in the field. Clicking on "Color" enables you to pick a new color for visual channel identification.

This meter indicates the input level for the selected input.

Set channel gain with the fader or entry field.

Shows the level of the channel output.

Shows the charging of the RMS limiter. Once the charging gets near 100% the limiter starts to reduce the output level.

Displays the gain reduction introduced by an active limiter.

Mute the output of the channel. Mute state is indicated by different colors.

Channel Equalizer area with graphical display of set eq parameters.

Set channel delay in different units. Generally activate or deactivate channel delay.

Invert polarity of this channel.

The current active channel preset is indicated here. By clicking on the preset name, a new window appears with the option to change the preset. The system wizard will guide you through the necessary steps.

The selected channel input is indicated. You can click on the channel input name to open the input mix matrix configuration window. You can also set the general input sensitivity here.

The current output for this physical channel is shown here. By clicking on the indicator the output matrix configuration window will open.

You have access to various channel settings. You can copy, save, paste and load settings. You can also delete this physical channel from within this menu.

You can add a new channel to your device.

You can load previously exported and saved channels.